MTM Hydro 16" Water Broom with 4 Nozzles and QC Filter Inlet
MTM Hydro Water Brooms bring sweeping to a whole new level. MTM Hydro's Water Brooms are an excellent way to push unwanted sand, dirt, and gravel out of the way to offer a more thorough cleaning experience. Choose from a variety of options from the number of nozzles to inlet fittings for an upgraded cleaning package. These light-weight Alumimum Brooms offer dustless sweeping and single pass cleaning with 16" or 20" spray paths (with 4.0 nozzles installed).
When using a Water Broom, keep in mind that with added nozzles, comes added outlets so your pressure and PSI will be divided into 1/3's for the 12" x 3 nozzle broom and 1/4's for the 16" 4 nozzle broom. Example: if you choose a 16" broom with 4 nozzles and you have a 2 GPM machine with 4000 PSI, each nozzle will have 0.5 GPM and approximately 1000 PSI (depending upon orifice size).
Specs of this Broom: -16" Broom with two Ball bearing casters (24 - ball bearings) -Four 2.0 - 1/4" 4.0 threaded nozzles installed using Loctite (Nozzle item number 17.0211) -A High pressure filter with 1/4" Plated Steel Plug has been installed at the inlet using Loctite - this upgrade filters water before entering the brooms holding reservoir which elimiantes the common issue of debris clogging the nozzle. Water Broom nozzles are very small in order generate the required pressure so grains of sand or other particulates can quickly clog a nozzle without this filter.