MTM Hydro BP92 Unloader - 1500 PSI

MTM Hydro's BP unloader series was specifically manufactured for total stop electric pressure washing installations that are typically found in car wash bays. These unloaders have the unique ability to restart pressure at one third of the working pressure while normal trapped pressure unloaders will restart within 100 PSI which causes pumps to cycle contantly. By restarting at a much lower PSI the pump accrues fewer hours and will last longer. The BP92 unloader also has an upgraded feature with an Easy Start Valve pre-installed at the bottom of the Unloader. The Easy Start Valve unloades pressure during the startup cycle which alleviates built pressure when pulling a rip cord on a mobile unit. This feature makes the BP92 an excellent option for both fixed and mobile installations

  • Bypass - Two available 3/8" NPT Female ports
  • Inlet - Two available 3/8" NPT Female on side or bottom
  • Outlet - 3/8" NPT Female
  • Mounting port - 3/8" NPT Female bottom mounting port available
  • Other - 1/4" Side port located near handle for supporting accessory
  • Max - 8 GPM
  • Max - 195°F temp rating
  • Rating - 250V - 15A

  •  Related image WARNING

    This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

    The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.