MTM Hydro KobraJet 75' 4,000 PSI Non-Marking Grey Hose
MTM Hydro's KobraJet Non Marking Grey Kobrajet Hose is available in various lengths to accomodate all cleaning scenarious. This true non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application. Kobrajet is manufactured out of high quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes. These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.
Kobrajet hose can handle temp spikes up to 310F but constant run temperatures should not exceed 275F
3/8" Male NPT Rigid End X 3/8" Male NPT Swivel End
Upgraded Hoses are available in stock sizes but if you are looking for a non-stock upgraded hose, add a hose upgrade part# to this order. Simply add 24.0186 (Brass Coupler and Plated Plug) or 24.0189 (Stainless Coupler and Plug) in the same quantity as your hose and we will install them using Medium Loctite with the correct torque to prevent leaks and make your system all QC!
This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.
The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.