MTM Hydro 1/2" Push Lock Fitting for Unloader Bypass
MTM Hydro's 1/2" Push Lock Fittings for Low Pressure Hoses are commonly used for the low pressure return line of an unloader. Install one end in the unloader bypass port and the other at the pump inlet in conjunction with the garden hose inlet adapter that includes a bypass port. Apply a small amount of lubricant to the barb and insert into your low pressure hose. A hose clamp is recommended for install at the barb and Teflon Tape is recommended for the NPT thread install.
This product can expose you to chemicals, including Lead which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.
The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.