Need Assistance?

We are here to help.

Call (866) 686-4020

MTM Hydro 4,000 PSI 2.5 Turbo Nozzle

Part Number:
16.0221
OEM Number:
16.0221
4 In Stock 4 In Stock Sign in to Buy

Description

This product recently changed manufacturers from China to RotoJet in Germany and is now offered with a grey jacket instead of blue. Due to this change, there may be situations where a mixed shipment of blue and grey are received, temporarily.

Since this product now comes from RotoJet in Germany, it is only offered with BSP threads. Not to worry, with a few extra wraps of teflon, the water tight seal will still be accomplished.

MTM Hydro's 4,000 PSI Turbo Nozzle is a utility accessory for Professionals and Home Owners alike. This Grey Jacketed turbo nozzle is a work horse with its hardened brass body and finished Ceramic internals. As with all RotoJets, this model has a laser nozzle that spins at an incredible rate increasing your cleaning area from zero degrees to 26°. MTM Hydro's Turbo Nozzles are found in a variety of industries including Sewer Cleaning, Contract Cleaning, Hydro Excavation, Mining, Potholing, Agriculture, Aggregate, Directional Drilling, Slurry Removal, Industrial Clean-up, Waste Clean-up, Lift-Station Clean-up, Manhole Clean-out, Culvert Clean-out, Lateral and Storm Drain Clean-out, Oil Spill Clean-up, Natural Disaster cleaning applications, Power Pole installation, Signs and Headstone setting, Graffiti & Gum Removal and Weekend Warrior Duties!

Keep your Turbo nozzle in top condition and upgrade with a High Pressure QC Filter by adding part number 16.0046 to your order. We'll install it using Medium Grade Threadlock tightened to spec, just order in the same quantity as the turbo nozzle quantity. Dont want to mess with extra part numbers? Check out our Upgraded Turbo nozzles for the all-in-one Ready to Use setup!

This Turbo Nozzle is also repairable and comes in a variety of sizes to fit any cleaning situation. Remember, always start the turbo nozzle in the downward facing position to reduce the risk of damaging the internal components. Should the unit ever need repair, we do offer repair kits if the internal ceramic chips or becomes severely worn, simply select the correct part number corresponding to the orifice size and model of the turbo nozzle.

1/4" Female BSP inlet

Brass Core with Grey Jacket and Ceramic Internals

Be sure to review the MTM Hydro nozzle chart when selecting your nozzle size



 Related image WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

Specifications

Orifice Size:
2.5
Style:
4,000 PSI Turbo Nozzle